Guide to Filling Out The Custom Order Form
- Height of Boots/How many Buttons?
The number of buttons you choose determines the height of your boots. If you want the most accuracy, the best way is to take a measurement of your leg:
- Measure up the side of your leg from the floor to the height you want.
- Check for the closest match in the table below.
eg. I want these boots about 12” high, so I would choose a 6-button.
2-buttons: 5″ or 12-13cm
3-buttons: 6.75″ or 17cm
4-buttons: 8.5″ or 21-22cm
5-buttons: 10.25″ or 26cm
6-buttons: 12″ or 30-31cm
7-buttons: 13.75″ or 35cm
8-buttons: 15.5″ or 39-40cm
9-buttons: 17.25” or 44cm
10-buttons: 18.5 -19″ or 47cm
2. Top Line
This refers to the shape of the top of the boot upper. A straight top line is the standard on most boots, as well as Most of our listings. The peaked top is pointed in the middle, whereas the side peak rises to a point on the outside. * Please note that although piping is optional for a straight top boot, it is required for both peaked and side peak boots as the points need it to maintain their shape. Here are examples:
3. Main Color of Moccasin
This is self explanatory, but if you are having difficulty making decisions about color combinations, I suggest starting by choosing your main color, and then go on to accents (trim & heel cap, extra trim layers, etc.). If it’s too hard to mix & match, by all
means simply use one of the existing listings by naming the style in the comments box at the bottom of the form. eg. “please make my boots exactly like the Beach & City boots, except with button #…”
The best way to see real examples of combinations is in the product photos and in the gallery photos.
4. Bottom Trim & Heel Cap Color
The trim is the strip of extra leather under the buttons. The heel cap is an extra layer to reinforce the heel area. These are included in all
the boots, and the color can either be the same as the main color, or another color of your choice. Again, you can see many examples in the gallery photos.
5. Heel Cap Style
There are 3 main styles of heel cap:
- The standard heel cap is separate from the tabs. The tabs are the leather loops with triangular stitching that the lace passes through.
- The full heel cap goes right to the top of the boot, and the tabs are connected to the heel cap.
- The asymmetrical heel cap is off centre to allow for a hidden knife sheath and pocket, if this is wanted. * Note: some customers like the asymmetrical heel cap style even without the knife pocket, as in the Kurt Russell style boots.
6. Style of Trim
The style of trim refers to the design type for the trim layer. The best way to figure this out is by looking at the options below or at photos on our website and referring to a listing that you like. Or invent something new!
Basic trim styles are included in the base price; more complex trim designs are priced accordingly. The most popular styles are listed in the menu, with photos below to illustrate. Any other style that is not here falls under “custom trim”, and you should describe what you want in the comments box, or by naming the listing that has the trim style you like(ie. “same trim as Magic Druid boots”).
7. Extra Trim Layer
As mentioned earlier, one layer of trim is always included. An Extra Layer of Trim is an option that adds depth and interest to the boots, and allows an extra color to be integrated if you wish. Both trim layers can also be the same color, which still adds depth and complexity to the design.
8. Extra Trim Layer Color
If there is any doubt about which layer of trim is which color though, please specify this in the comments section below.
I recommend choosing the button style after making the other ain’t choices of Color combinations trim styles etc. In order to match the boots you are creating.
10. Outer Sole Options
The three main styles of outer soling that are most practical for the majority of uses are the Vibram Newflex 8mm, Vibram new flex 5 mm, and the Vibram ‘s smooth 6 mm.
The Newflex 8mm is what I recommend to most people because it has an ideal combination flexibility, cushioning, traction and durability while being very lightweight.
The Newflex 5 mm is exactly the same but a little bit more flexible and less durable. I offered for those who prefer a thinner sole to to Be closer to the ground.
The 6mm Smooth is mainly for people who don’t want the tread pattern of the 8 mm.
The traditional leather sole is a great option for those who don’t want rubber, prefers something more traditional and natural, and I don’t mind doing more maintenance themselves. It is also much better suited to the forest and not concrete. It will not last as long as rubber, it will soak up water, and will delaminate much more easily.
The Minimalist Vibram 1 mm is only for those who want the absolute minimum because they are committed to minimalist footwear.
Piping is a thin strip of leather wrapped tightly over an otherwise exposed edge.
For our moccasins, this consists of the top line and the opening on the side where the buttons are. Although piping provides added rigidity and protection to the bare edges, it is optional for straight top line boots.
Many customers choose to have it though as it gives a more finished look, especially for boots with an extra trim layer or fancier design, as it ties it all together neatly.
However, if you choose a peaked top line or a side peak, piping is required to hold this shape.
For a more rugged look, such as the Kurt Russell Style Action Boots, or a simpler style such as the 2-button Black Booties, no piping is better suited.
* The half piping option is only for those ordering a cuff, as the cuff already covers the top line, and the half piping would then cover the edge down the side of the opening.
12. Piping Color
For a more subtle top line choose the piping color the same as the main
color, as it will blend, yet will add contrast on the side opening, depending
on the color of trim. If you prefer a top line with more contrast then choose one of the trim colors for
piping instead of the main color (as in examples above).
The cuff is a bold feature that lends flair and adds an authentic look to Renaissance Boots, Pirate Boots, or any period costume.
14. Toe Cap
The toe cap is an extra layer of leather covering the toe are of the boots. It is mostly an aesthetic consideration, but also adds another layer of protection to this area.
For people who are wanting a more soft moccasin feel, it is better without; For those preferring a bit more rigidity and protection, The toe cap is a good choice.
* Please note: As each boot is custom patterned and the sole made according to your foot tracing, there are often slight differences between the left and right toe box shape and toe cap.
16. Arch Support
The arch support option is for those who prefer some support in this area. If you are comfortable in bare feet, flat sandals, or other simple footwear, then recommend no arch support.
If you feel you need it, then we will custom fit your support and build it into your insole. See photos below #17 for insole options.
17. Insole Options
The insole is on the inside of the moccasin and can be removed to air out or to replace with a winter/summer version for different seasons.
The insole is made up of 3 layers:
– A thin base layer of dense orthotic cushion (3mm)
– A thicker layer or medium density orthotic quality cushioning (6mm)
– An optional arch support pad
- A top layer of either smooth leather (for summer insoles) or quality wool felt (for winter insoles).
18. Custom Artwork or Specialty Designs
This is where the fun really begins! The limit is your imagination… choose a theme or symbol that has personal meaning for you and reflects your own uniqueness. This is a co-creative process between you and the artisan.
You can also simply choose any design you see in the photo gallery, or use these as inspiration to have something new created. In this case you can send us images or sketches and if more clarification is needed a phone consultation can be booked with Nathan, the artisan. All custom work, including design time, research, or consultations, is billed at $75/hr.
Please see the gallery for more examples. Soul Path Shoes is where your dream boots come true.